GRLevel3

[Jeff Russell]

Hello all,

First time poster (#2 really) and wanted to say hello to all. My question, has anyone had problems running GRLevel3 on VISTA Home 32bit?

My problem is when I go to start the program I first get the UAC box advising me that GR wants to access my computer, when I click on allow, I get a msg that GR has stopped working.

I can't find any help on the GRLevelX Trial Support Forums.

Any suggestions?

Jeff

[Dean Baron]

try this:
http://www.grlevelx.com/owners/

I have had that problem in the past, unfortunately there are many things that can cause it and i dont remember how i fixed buy im sure there is someone on the owner's site who can help ya out.

[Jeff Russell]

try this:
http://www.grlevelx.com/owners/

I have had that problem in the past, unfortunately there are many things that can cause it and i dont remember how i fixed buy im sure there is someone on the owner's site who can help ya out.

Unfortunately I am not a owner and therefor can not access the owner's msg board.

[Joey Ketcham]

I am running GRLevel3 on Vista just fine. It might be having a video driver conflict, make sure your video card's driver is up to date and try reinstalling.

[darnallj]

Here are a couple posts form the oweners forum

With Vista you need to make sure that you install the program with admin privileges

If you're running Vista then the most likely cause is that Data Execution Prevention (DEP) is killing grlevel3.exe. Search for DEP in Vista's Help and turn it off for grlevel3.exe.

[Jason Boggs]

Jeff, what does the error say when it comes up. I'm not sure what it could be, but make sure you have the actual icon that you click on in the Grlevel3 folder. Hope that makes sense.

[Jeff Snyder]

Jeff, what does the error say when it comes up. I'm not sure what it could be, but make sure you have the actual icon that you click on in the Grlevel3 folder. Hope that makes sense.

Yeah - we need the exact text of the exit box. One of the more common reasons why GR3 doesn't load - incorrect computer clock settings. Is your computer clock (lower right-hand corner on Windows machines) set to the correct time? GR will not load up if the clock is incorrect by an appreciable amount.

[darnallj]

Yeah the clock could be if the time on your pc is more than 5 mintues ahead of or behind the utc clock it will exit GR

[Jeff Russell]

Clock is fine.

I can right click on the program icon in the correct folder and run as admin and still get the following errors.

First, I get the windows User Account Control window informing me that an unidentified program wants to run. I clicked on allow.

Next,
1907
then,

1908

Thanks,

Jeff

[Jeff Russell]

Here are a couple posts form the oweners forum

With Vista you need to make sure that you install the program with admin privileges

If you're running Vista then the most likely cause is that Data Execution Prevention (DEP) is killing grlevel3.exe. Search for DEP in Vista's Help and turn it off for grlevel3.exe.

Thanks, researching now.....

[Jeff Russell]

I am running GRLevel3 on Vista just fine. It might be having a video driver conflict, make sure your video card's driver is up to date and try reinstalling.

Video card looks fine.

1909

Jeff

[Aaron Wesson]

Install with admin privledges
You can also try to do a search
Start/Search/grlevel3.exe
when you see the icon right click it and run as admin

see what that does for you

I have been using GR3 and GR2AE on Vista Enterprise 32bit for a year and not had any issues.

[Jeff Russell]

Just tried version 1.44. Still no luck. Any ideas.......

[Tim Shriver]

Just tried version 1.44. Still no luck. Any ideas.......

How did you get version 1.44 if you do not have access to the
Owners forums?

You stated earlier you could not find an answer in the Trial Users Forum,
thus I wonder why you do not look for the answers in the Owners forums?

Have you registered it? If so, you should ask the question in the Owner
Forum.

Tim

[rdale]

V1.52 is the latest... Did you run/install as admin as pointed out above?

[Jeff Russell]

How did you get version 1.44 if you do not have access to the
Owners forums?

You stated earlier you could not find an answer in the Trial Users Forum,
thus I wonder why you do not look for the answers in the Owners forums?

Have you registered it? If so, you should ask the question in the Owner
Forum.

Tim

I download the grlevel3_setup.exe file. It was version 1.44. I'm not a owner. I am still trying to install program via the 21 day trial. Thus I do not have access to the owners forums.

[Jeff Russell]

V1.52 is the latest... Did you run/install as admin as pointed out above?

yes I did install as admin. even tried to run the program with admin privileges. I still get the same error msg as stated in earlier post.

[rdale]

Last possibility I can think of is DEP. Have you posted on the Trial Forums?

[Tim Shriver]

I download the grlevel3_setup.exe file. It was version 1.44. I'm not a owner. I am still trying to install program via the 21 day trial. Thus I do not have access to the owners forums.

1.44 will not work unless the program is registered.

How did you get the grlevel3_setup.exe if you
have not registered the program?

The only place you should be able to get that program
is from the Owners Forum.

I hope folks are not passing around grlevel3_setup.exe
and reg. keys again, Mike will be thrilled!



Tim

[Jim Zandonai]

The error message is a generic message from vista not the program itself. I get the same thing with I.E sometimes. If its a trial program within it's period it should run. If all is legit and this is probably too easy for a fix..but try and shut off your firewall and antivirus software if activated to see if it runs then. I have had issues with other programs not running well with certain anti-virus stuff etc. If that doesn't work try going into safe mode and trying to run it there. I have vista 32 and run the grlevelx programs glitch free though. Maybe it's just running into a conflict..?

[rdale]

How did you get the grlevel3_setup.exe if you
have not registered the program?

From the download page - http://grlevelx.com/

Click "GRLevel3" under "Downloads"

[Jeremy Jones]

I also run Grlevel3 on my laptop with Vista 32 bit....Runs like a champ! I haven't had any problems.

[Jeff Russell]

1.44 will not work unless the program is registered.

How did you get the grlevel3_setup.exe if you
have not registered the program?

The only place you should be able to get that program
is from the Owners Forum.

I hope folks are not passing around grlevel3_setup.exe
and reg. keys again, Mike will be thrilled!



Tim

1.44 is from the download link on the GRL3 web page.

[Scott Roberts]

Not 100% releated....but FYI, GRLevel3 is working wonderfully for me on Windows7...and it was as simple to set up as on XP. I skipped Vista.

[rdale]

Jeff - have you checked the DEP? Have you posted on Trial forum?

[Jeff Russell]

Jeff - have you checked the DEP? Have you posted on Trial forum?

checking DEP now, no to the posting

[Jeff Russell]

Solution found. It was DEP. I turned DEP off for GRL3 and it is running now. Thanks everyone!

Jeff

[Tim Shriver]

From the download page - http://grlevelx.com/

Click "GRLevel3" under "Downloads"


You are correct, sorry. (man that hurt) But I still do not think it will
run unless registered...

:)

Tim

[rdale]

It really will. That's the trial version, if you have a key - it becomes the registered one ;)

[Jeff Russell]

Now is there anyway to get rid of the UAC for one program? I know you can turn UAC off completely. With GRL3 I get the UAC every time I launch the program. Is this normal for everyone else?

[nmjameswilson]

If i want to get grlevel3 for the whole season what is the costs? I've seen different amounts posted.

[Jeff Snyder]

If i want to get grlevel3 for the whole season what is the costs? I've seen different amounts posted.

GR3 is a one-time cost of $79. No subscription or recurring costs after that (unless you want a dedicated Level 3 radar feed).


Purchase GRLevel3 can be ordered online at any time. Once you have purchased GRLevel3, a registration key will be sent to you via email. Select Help->About and click the Register button. Paste the registration key into the dialog box and press OK to remove the time limit.
GRLevel3 is available through RegSoft.com for $79.95. RegSoft offers a full range of payment options (http://www.regsoft.com/flexible%20payment%20options.shtml). Click on the button below to purchase via their secure online ordering system. If purchasing by phone, be sure to note GRLevel3's ProductID: 70583.
Please evaluate GRLevel3 with the 21 day free trial before purchasing as there are no refunds.

[nmjameswilson]

Thanks Jeff, I'll add that to my laptop.